What is a loader how it use ?
Sometimes the wrong software or something else went wrong
during a software upgrade or downgrade .Because of this our satellite receiver gets stuck at a
red light. In that case, we have our own .There are two ways
to turn on the satellite receiver. We recover our box via loader tool .And the second
option we have is Bios Flashing Programmer which is available with most
mechanics.But in this post, I will talk about loader tool.Loader Tool is a computer software, which every satellite
receiver maker will give to its users .Also providing for
use during damage or loss. Of your recipient To recover, we
need three basic things. (1) Computer.(2) RS232 cable and (3) loader tool. Do you know about computers or laptops so I don't need to
talk about computers anymore?
What is RS232 cable?
To inject software into our box, we need a computer or
from our satellite receiver. The loader needs
three main connections RX, TX, and GND. So for that we own. Need to connect
STB or satellite receiver to computer or laptop. In this case .I, we need a
special cable, called RS232 or DB9 cable. you .Rs.223 cable in
any local election market or any satellite dish mechanic's shop . You can buy from
any online store. Satellite receiver
loader tools .Rs 232 cable for laptop user.If you have a laptop user and you use this whole process
on a laptop. If you want, you
have to buy two cables, a Rs. 232 USB male cable, and Another Rs. 232
female cable. Both of these cables are not very expensive. And any of you Can easily buy
from the electronic market or online store. But remember that We need to install
software on any satellite receiver via CH341 or CH340 IC Needed, so when
you buy a USB cable for Rs. 232, you need a vendor Requires that you
provide them with CH340 or CH341 supported IC .Give RS232 USB cable. Otherwise, the loader will not
work. Rs. 232 cable for PC / Computer users. If you have a PC or computer and you want to use a loader
on it. Then you A simple cable
RS232 family to family cable must be purchased. And you with this single cable All can act. RS232 mini cable / jacket. To perform all these operations, our recipient has a
jacket or port of Rs. 232 Must have. So
nowadays most receivers come without external RS232 port have been. In this
case, let us insert another mini RS232 cable inside our receiver Need You can use
this mini RS232 cable from any Dish Satellite Receiver Mechanic Shop You can also take
it or you can remove it from another old receiver Can also be removed from the old receiver.
When you have arranged all of the above according to your
need, then its
Next you need a
loader tool related to your satellite receiver processor. Different
There is more than
one satellite receiver with the processor. And in this post, I'm yours
I am going to
share satellite receiver loader tools for download with
